JAPANESE

安藤研究室

ANDO Laboratory

Publication

Research treatise

2021

  1. “Plant-based tacca leontopetaloides biopolymer flocculant (TBPF) produced high removal of heavy metal ions at low dosage” Makhtar, N.S.M., Idris, J., Musa, M., Andou Y., Hamid, K.H.K., Puasa, S.W. Process 2021, Vol. 9(1), Article number 37.
  2. “Hydrothermally reduced graphene hydrogel intercalated with divalent ions for dye adsorption studies” Zheng, A.L.T., Boonyuen, S., Ohno, T., Andou, Y., Process 2021, Vol. 9(1) , Article number 169.
  3. “Surface functionalization of biochar from oil palm empty fruit bunch through hydrothermal process” Ibrahim, I., Tsubota, T., Hassan, M.A., Andou, Y., Processes 2021, Vol. 9(1), Article number 149.
  4. “Melt-vs. Non-melt blending of complexly processable ultra-high molecular weight polyethylene/cellulose nanofiber bionanocomposite” Sharip, N.S., Ariffin, H., Yasim-Anuar, T.A.T., Andou Y., Shirosaki Y.,Jawaid M., Tahir, P.M., Ibrahim, N.A. Polymers 2021, Vol. 13(3), Article number 404.
  5. “Enhancing Mechanical Properties of Polyurethane with Cellulose Acetate as Chain Extender” Mustapha, S., Andou, Y., Fibers and Polymers 2021, DOI 10.1007/s12221-021-0789-0.
  6. “Detection and remediation of bisphenol A (BPA) using graphene-based materials: mini-review” Zheng, A.L.T., Andou, Y. International Journal of Environmental Science and Technology 2021, DOI 10.1007/s13762-021-03512-x.
  7. “Tailored higher performance silicone elastomer with nanofibrillated cellulose through acidic treatment” Mustapha, S., Andou, Y., Polymer Composites 2021, Vol. 42 (5), Pages 2282 – 2292.
  8. “Accessing effects of aliphatic dicarboxylic acid towards the physical and chemical changes in low temperature hydrothermally reduced graphene hydrogel” Zheng, A.L.T., Boonyuen, S., Ohno, T., Andou, Y. Journal of Porous Materials 2021, Vol. 28(4), Pages 1291 – 1300.
  9. “Tunable electrochemical behavior of dicarboxylic acids anchored Co-MOF: Sensitive determination of rutin in pharmaceutical samples” Sivam, T., Gowthaman, N.S.K., Lim, H.N., Andou Y., Arul P., Narayanamoorthi, E., John, S.A., Colloids and Surfaces A: Physicochemical and Engineering Aspects 2021, Vol. 6225, Article number 126667.
  10. “Design of reduced graphene hydrogel with alkylamine surface functionalization through immersion/agitation method and its adsorption mechanism” Zheng, A.L.T., Boonyuen, S., Li, G.Y., Ngee, L.H., Andou, Y., Journal of Molecular Structure 2021, Vol. 1245, Article number 131008.
  11. “PCPDTBT copolymer based high performance organic phototransistors utilizing improved chain alignment” Yadav, N., Kumari, N., Ando, Y., Pandey, S.S., Singh, V., Optical Materials 2021, Vol. 113, DOI 10.1016/j.optmat.2021.110886.
  12. “Development of High-Sensitivity Poly(2,7-(9,9-dioctylfluorene)-alt-5,5-(4′,7′-di-2-thienylbenzo [c][1,2,5]thiadiazole)) Thin-Film-Based Phototransistors by the Ribbon-Floating Film Transfer Method” Yadav, N., Kumari, N., Ando, Y., Pandey, S.S., Singh, V., Physica Status Solidi-Rapid Research Letters 2021, DOI 10.1002/pssr.202100185.
  13. “Probing the metal/conducting polymer interface and implications of the metal diffusion in two-terminal sandwich devices” Yadav, N., Kumari, N., Ando, Y., Pandey, S.S., Singh, V., Synthetic Metals 2021, 278, 116797.
  14. “Cu2O/TiO2 decorated on cellulose nanofiber/reduced graphene hydrogel for enhanced photocatalytic activity and its antibacterial applications” Zheng, A.L.T., Sabidi S., Ohno T., Maeda T., Andou, Y. Chemosphere 2021, in press, DOI 10.1016/j.chemosphere.2021.131731.

2020

  1. “Characterization of Lignocellulosic Biomass from Malaysian’s Yankee Pineapple AC6 Toward Composite Application” Najeeb, M.I., Sultan, M.T.H., Andou, Y., Shah A.U.M., Eksiler K., Jawaid, M., Ariffin, A.H. Journal of Natural Fibers 2020, DOI: 10.1080/15440478.2019.1710655
  2. “Characterization of silane treated Malaysian Yankee Pineapple AC6 leaf fiber (PALF) towards industrial applications” Najeeb, M.I., Sultan, M.T.H., Andou, Y., Shah A.U.M., Eksiler K., Jawaid, M., Ariffin, A.H., Journal of Materials Research and Technology 2020, Vol. 9 (3), Pages 3128 – 3139.
  3. “Static mechanical, thermal stability, and interfacial properties of superheated steam treated oil palm biomass reinforced polypropylene biocomposite” Warid, M.N.M., Yasim-Anuar, T.A.T., Ariffin, H., Hassan M.A., Andou, Y., Shirai, Y. Pertanika Journal of Science and Technology 2020, Vol. 28 (S2), Pages 287 – 298.
  4. “Nutritional characteristics of biochar from pineapple leaf residue and sago waste” Bohari, N., Mohidin, H., Idris, J., Andou Y., Man S., Saidan, H., Mahdian, S. Pertanika Journal of Science and Technology 2020, Vol. 28 (S2), Pages 273 – 286
  5. “Well-dispersed cellulose nanofiber in low density polyethylene nanocomposite by liquid-Assisted extrusion” Yasim-Anuar, T.A.T., Ariffin, H., Norrrahim, M.N.F., Hassan M.A., Andou, Y., Tsukegi, T., Nishida, H. Polymers 2020, Vol. 12(41) Article number 927
  6. “Plant-based Tacca leontopetaloides biopolymer flocculant (TBPF) produced high removal of turbidity, TSS, and color for leachate treatment” Makhtar, N.S.M., Idris, J., Musa, M., Andou Y., Hamid, K.H.K., Puasa, S.W. Process 2020, Vol. 8(51), Article number 527
  7. “Modification of cellulose degree of polymerization by superheated steam treatment for versatile properties of cellulose nanofibril film” Megashah, L.N., Ariffin, H., Zakaria, M.R., Hassan M.A., Andou, Y., Padzil, F.N.M. Cellulose 2020, Vol. 27 (13), Pages 7417 – 7429.
  8. “Synthesis of silver nanoparticles/porphyrin/reduced graphene oxide hydrogel as dye adsorbent for wastewater treatment” Lim Teik Zheng, A., Phromsatit, T., Boonyuen, S., Andou, Y. FlatChem 2020, Vol. 23, Article number 100174.
  9. “Process optimization of ultra-high molecularweight polyethylene/cellulose nanofiber bionanocomposites in triple screw kneading extruder by response surface methodology” Sharip, N.S., Ariffin, H., Andou, Y., Shirosaki Y., Bahrin E. K., Jawaid M., Tahir, P.M., Ibrahim, N.A. Molecules 2020, Vol. 25 (19), Article number 4498.
  10. “Effect of drying methods and parameters on the antioxidant properties of tea (Camellia sinensis) leaves” A. S. Roslan, A. Ismail, Y. Ando and A. Azlan Food Production, Processing and Nutrition 2020, 2(1):8.
  11. “Parameters Optimization in Compression Molding of Ultrahigh Molecular Weight Polyethylene/Cellulose Nanofiber Bionanocomposites by using Response Surface Methodology” N. Sharip, H. Ariffin, Y. Andou, E. K. Bahrin, M. Jawaid, P. Tahir, N. Ibrahim, Pertanika Journal of Science and Technology 2020, Vol. 28 (S2), Pages 299 – 316.

2019

  1. “Implication of Molecular Weight on Optical and Charge Transport Anisotropy in PQT-C12 Films Fabricated by Dynamic FTM” Atul S. M. Tripathi, Shifumi Sadakata, Rakesh Kumar Gupta, Shuichi Nagamatsu, Yoshito Ando, Shyam S. Pandey. ACS Appl. Mater. Interfaces 2019, 11, 28088?28095
  2. “Biological Pretreatment of Oil Palm Empty Fruit Bunch by Schizophyllum commune ENN1 without Washing and Nutrient Addition” Enis Natasha Noor Arbaain, Ezyana Kamal Bahrin, Mohamad Faizal Ibrahim, Yoshito Ando, Suraini Abd-Aziz. Processes 7 (7), 402. https://doi.org/10.3390/pr7070402
  3. “Effect of glucose and ascorbic acid on total phenolic content estimation of green tea and commercial fruit juices by using Folin Ciocalteu and Fast Blue BB assays.” Roslan, Ahmad Syazrin and Ando, Yoshito and Azlan, Azrina and Ismail, Amin (2019) Pertanika Journal of Tropical Agricultural Science, 42 (2). pp. 545-556. ISSN 1511-3701; ESSN: 2231-8542
  4. “Surface modification for nano-lignocellulose fiber through vapor-phase-assisted surface polymerization” Eksiler, K., Andou, Y., Ariffin, H., Shirai, Y. Journal of Polymer Science, Part A: Polymer Chemistry 2019, Volume 57, Issue 24, Pages 2575 – 2580.
  5. “Implication of Molecular Weight on Optical and Charge Transport Anisotropy in PQT-C12 Films Fabricated by Dynamic FTM” Atul S. M. Tripathi, Shifumi Sadakata, Rakesh Kumar Gupta, Shuichi Nagamatsu, Yoshito Ando, Shyam S. Pandey. ACS Appl. Mater. Interfaces 2019, 11, 28088-28095
  6. “Biological Pretreatment of Oil Palm Empty Fruit Bunch by Schizophyllum commune ENN1 without Washing and Nutrient Addition” Enis Natasha Noor Arbaain, Ezyana Kamal Bahrin, Mohamad Faizal Ibrahim, Yoshito Ando, Suraini Abd-Aziz. Processes 7 (7), 402. https://doi.org/10.3390/pr7070402
  7. “Effect of glucose and ascorbic acid on total phenolic content estimation of green tea and commercial fruit juices by using Folin Ciocalteu and Fast Blue BB assays.” Roslan, Ahmad Syazrin and Ando, Yoshito and Azlan, Azrina and Ismail, Amin (2019) Pertanika Journal of Tropical Agricultural Science, 42 (2). pp. 545-556. ISSN 1511-3701; ESSN: 2231-8542

2018

  1. “Characteristics of cellulose from oil palm mesocarp fibres extracted by multi-step pretreatment methods” L N Megashah, H Ariffin, M R Zakaria and Y Ando. IOP Conference Series: Materials Science and Engineering (2018) , Volume 368, conference 1.
  2. “Synthesis and characterization of lithium titanate (Li4Ti5O12) nanopowder for battery applications ” M. Selvamurugan, C. Natarajan, Y. Andou, S. Karuppuchamy. Journal of Materials Science: Materials in Electronics (2018), Vol. 29(20) , pp 17826?17833.
  3. “Development of Organo-Dispersible Graphene Oxide via Pseudo-Surface Modification for Thermally Conductive Green Polymer Composites” Siew teng Sim, Yoshito Andou*, Hamra A. A. Bashid, Hong-ngee Lim, Mohammednoor Altarawneh, Zhongtao Jiang, Kubra Eksiler, and Satoshi Iikubo. ACS Omega(2018), 3 (12), pp 18124?18131.
  4. “Simple Manufacture of Surface-Modified Nanolignocellulose Fiber via Vapor-Phase-Assisted Surface Polymerization” Kubra Eksiler, Yoshito Andou, Yoshihito Shirai. ACS Omega (2018), 3, 4545?4550.

2017

  1. “Effects of Deposition Parameters on the Electrochemical Behaviour of ZnO Thin Film” Journal of Advanced Chemical Sciences, 3(4), 521-524 (2017). A.L.T. Zheng, Y. Andou, R.M. Zawawi.
  2. “Green polymer blends compatibilized with biomass derived-agents” Academia Journal of Environmental Science 5(11), 193-199 (2017). Wei Kit Chee, Kubra Eksiler, Yoshito Andou and Yoshihito Shirai.
  3. “Functionalized Graphene Oxide-Reinforced Electrospun Carbon Nanofibers as Ultrathin Supercapacitor Electrode” Journal of Energy Chemistry, 26(4), 790-798 (2017) Wei Kit Chee, Hamra Assyaima Abdul Bashid, Yoshito Andou, Zulkarnain Zainal, Ian Harrison, Nay Ming Huang, Mohammednoor Altarawneh, Zhong Tao Jiang.
  4. “Facile synthesis of Co?WO3/functionalized carbon nanotube nanocomposites for supercapacitor applications” Journal of Materials Science: Materials in Electronics, 28 (7), pp. 5425-5434 (2017) Dhilip Kumar, R., Andou, Y., Karuppuchamy, S.
  5. “Electrospun Nanofiber Membranes as Ultrathin Flexible Supercapacitors” RSC Advances, 7, 12033-12040 (2017). Chee Wei Kit, Lim Hong Ngee, Zainal Zulkarnain, Harrison Ian, Huang Nay Ming, Ando Yoshito, Chong Kwok Feng, Pandikumar Alagarsamy.
  6. “Electrospun graphene nanoplatelets-reinforced carbon nanofibers as potential supercapacitor electrode” Materials Letters, 199 , pp. 200-203 (2017) Chee, W.K., Lim, H.N., Zainal, Z, Harrison, I., Andou, Y., Huang N.M., Altarawneh, M., Jiang, Z.T.
  7. “Microwave assisted synthesis of perovskite structured BaTiO3 nanospheres via peroxo route for photocatalytic applications” Ceramics International, 43 (1), pp. 556-563 (2017) Thamima, M., Andou, Y., Karuppuchamy, S.

2016

  1. “Microwave-assisted synthesis of zn-WO3 and ZnWO4 for pseudocapacitor applications” Journal of Physics and Chemistry of Solids, 2016, 92, Pages 94?99. 　R. Dhilip Kumar, Y. Andou, S. Karuppuchamy 　doi:10.1016/j.jpcs.2016.01.022
  2. “Flexible Graphene-Based Supercapacitors: A Review” J. Phys. Chem. C, 2016, 120 (8), pp 4153?4172 　W. K. Chee, H. N. Lim, Z. Zainal, N. M. Huang, I. Harrison, Y. Andou 　DOI: 10.1021/acs.jpcc.5b10187
  3. “Synthesis of nanostructured Cu-WO3 and CuWO4 for supercapacitor applications” Journal of Materials Science: Materials in Electronics, 2016, 27 (3), 2926?2932. R. Dhilip Kumar, Y. Andou, M. Sathish, S. Karuppuchamy DOI: 10.1007/s10854-015-4111-z
  4. “Auto-Drawing and Functionalization by Vapor-Phase Assisted Polymerization on Solid Surface Journal of Photopolymer Science and Technology” Journal of Photopolymer Science and Technology,2016, 29(1), PP.17-23. S. Gomi, Y. Andou, H. Nishida
  5. “Microwave-assisted synthesis of zn-WO3 and ZnWO4 for pseudocapacitor applications” Journal of Physics and Chemistry of Solids, 2016, 92, Pages 94?99. R. Dhilip Kumar, Y. Andou, S. Karuppuchamy doi:10.1016/j.jpcs.2016.01.022
  6. “Flexible Graphene-Based Supercapacitors: A Review” J. Phys. Chem. C, 2016, 120 (8), pp 4153?4172 W. K. Chee, H. N. Lim, Z. Zainal, N. M. Huang, I. Harrison, Y. Andou DOI: 10.1021/acs.jpcc.5b10187
  7. “Synthesis of nanostructured Cu-WO3 and CuWO4 for supercapacitor applications” Journal of Materials Science: Materials in Electronics, 2016, 27 (3), 2926?2932. R. Dhilip Kumar, Y. Andou, M. Sathish, S. Karuppuchamy DOI: 10.1007/s10854-015-4111-z

2015

  1. “Successful scaling-up of self-sustained pyrolysis of oil palm biomass under pool-type reactor” Waste Management & Research, 2015, 34, 176-180, Juferi Idris, Yoshihito Shirai, Yoshito Andou, Ahmad Amiruddin Mohd Ali, Mohd Ridzuan Othman, Izzudin Ibrahim, Akio Yamamoto, Nobuhiko Yasuda, Mohd Ali Hassan DOI:10.1177/0734242X15616472
  2. “Synthesis and characterization of nanostructured Ni-WO3 and NiWO4 for supercapacitor applications” Journal of Alloys and Compounds, 2015, 654, 349?356. R. Dhilip Kumar, Y. Andou, S. Karuppuchamy DOI: 10.1016/j.jallcom.2015.09.106
  3. “Thermo-Mechanical Properties of Palm Fiber Plastic (PFP) Composites” Advanced Science, Engineering and Medicine, 2015, 7, 844-848. Karuppuchamy, S., Andou, Y., Baharuddin, A. S., Sulaiman, A., Hassan, M. A., Nishida, H., Shirai, Y. DOI: 10.1166/asem.2015.1769
  4. “Improved yield and higher heating value of biochar from oil palm biomass at low retention time under self-sustained carbonization” Journal of Cleaner Production, 2015, 104, 475?479. Juferi Idris, Yoshihito Shirai, Yoshito Anduo, Ahmad Amiruddin Mohd Ali, Mohd Ridzuan Othman, Izzudin Ibrahim, Rafidah Husen, Mohd Ali Hassan DOI:10.1016/j.jclepro.2015.05.023
  5. “Preparation and characterization of silver nanoparticles-reduced graphene oxide on ITO for immunosensing platform” Sensors and Actuators B: Chemical, 2015, 221, 1423?1432 A Jamil, H.N. Lim, N.A. Yusof, Ahmad A Tajudin, N.M. Huang, A Pandikumar, Moradi A Golsheikh, Y.H. Lee, Y Andou DOI: 10.1016/j.snb.2015.06.156
  6. “Effects of milling methods on tensile properties of polypropylene / oil palm mesocarp fibre biocomposite” Pertanika J. Sci. & Technol., 2015, 2, 325 ? 337. N.I.A.A. Nordin, H. Ariffin, M.A. Hassan, N.A. Ibrahim , Y. Shirai, Y. Andou
  7. “Self-sustained carbonization of oil palm biomass produced an acceptable heating value charcoal with low gaseous emission” Journal of Cleaner Production, 2015, 89, 257?261. Juferi Idris, Yoshihito Shirai, Yoshito Andou, Ahmad Amiruddin Mohd Ali , Mohd Ridzuan Othman, Izzudin Ibrahim and Mohd Ali Hassan
  8. “Superheated Steam Treated Oil Palm Frond Fibers and Their Application in Plastic Composites” Advanced Science, Engineering and Medicine,2015, 7, 120-125. Karuppuchamy, S., Andou, Y., Nishida, H.,Nordin, N. I. A. A., Ariffin, H., Hassan, M. A., Shirai, Y. DOI: 10.1166/asem.2015.1659

2014

  1. “Enhancement of compatibility based on vapor-phase assisted surface polymerization (VASP) method for polymer composites with agricultural wastes” Composite Interfaces, 2014, in printing . Yoshito Andou, Hee-Sung Lee, Donghee Kim, Norio Nagasawa, Haruo Nishida, Yoshihito Shirai
  2. “Enhanced Biocatalytic Esterification with Lipase-Immobilized Chitosan/Graphene Oxide Beads” PLoS ONE, 2014, 9(8): e104695. Doi:10.1371/ journal.pone. 0104695 Siaw Cheng Lau, Hong Ngee Lim mail, Mahiran Basri, Hamid Reza Fard Masoumi, Asilah Ahmad Tajudin, Nay Ming Huang, Alagarsamy Pandikumar, Chi Hua Chia, Yoshito Andou
  3. “Production of biochar with high mineral content from oil palm biomass.” The Malaysian Journal of Analytical Sciences, 2014, 18(3), 700 -704. Juferi Idris, Yoshihito Shirai, Yoshito Ando, Ahmad Amiruddin Mohd Ali , Mohd Ridzuan Othman, Izzudin Ibrahim and Mohd Ali Hassan.
  4. “EFFECT OF ULTRASONIC-ASSISTED EXTRACTION ON PHENOLIC CONTENT OF AVOCADO” The Malaysian Journal of Analytical Sciences, 2014, 18(3), 690 -694. Rafidah Husen, Yoshito Andou, Amin Ismail, Yoshihito Shirai
  5. “An Useful Biomass Component for Simple Fabrication of the Honeycomb Poly(L-lactide) Film” Nanobio Bionano, 2014, 1, 9-12. Yoshito Andou, Suphachai Pattanawihok, Vincent Jauzein, Minato Wakisaka, Yoshihito Shirai, Haruo Nishida
  6. “Synthesis of Bio-based Monomer from Vegetable Oil Fatty Acids and Design of Functionalized Greener Polyester” Chemistry Letters, 2014, 43(9), 1517-1519. Rahim Noor Farisha, Watanabe Kohtaro, Ariffin Hidayah, Yoshito Andou, Hassan Mohd Ali, Shirai Yoshihito

2013

  1. “Development of Biocomposites Containing Erianthus Arudinaceus as Cellulose Resource Crops” KOBUNSHI RONBUNSHU, 2013, 71(1), 31-37. Hee-Sung Lee, Minato Wakisaka, Norio Nagasawa, Haruo Nishida, Yoshito Andou
  2. “Modification of Oil Palm Mesocarp Fiber Characteristics Using Superheated Steam Treatment” Molecules, 2013, 18(8), 9132-46. Noor Ida Amalina Ahamad Nordin, Hidayah Ariffin , Yoshito Andou, Mohd Ali Hassan, Yoshihito Shirai, Haruo Nishida, Wan Md Zin Wan Yunus, Nor Azowa Ibrahim, Subbian Karuppuchamy
  3. “A Cross-Linked Polystyrene Supported Hindered Lithium Amide as a Deprotonation Reagent for α-Methylation of Lactic Acid” Tetrahedron Letters, 2013, 54, 4320?4323. Watanabe, K., Andou, Y., Shirai, Y., Nishida, H.
  4. “A Simple Synthetic Route for the Preparation of Tetramethylglycolide from Lactic Acid” Chemistry Letters, 2013, 42(2), 159-161. Watanabe, K., Andou, Y., Shirai, Y., Nishida, H.

2012

  1. “Polyhydroxyalkanoate Synthesis by Recombinant Escherichia coli JM109 Expressing PHA Biosynthesis Genes from Comamonas sp. EB172” J Microb Biochem Technol, 2012, 4(4), 103-110. Yee, L-N., Mumtaz, T., Mohammadi, M., Phang, L-Y., Ando, Y., Raha, A. R., Sudesh, K., Ariffin, H., Hassan, M. A., Zakaria M. R.
  2. “Preparation of nanostructured TiO2 photoelectrode for flexible dye-sensitized solar cell applications” Appl Nanosci, 2012 Karuppuchamy, S., Andou, Y., Endo, T.
  3. “Recovery and purification of intracellular　polyhydroxyalkanoates from recombinant　Cupriavidus necator using water and ethanol” Biotechnol Lett , 2012, 34, 253-259, Mohammadi, M., Hassan, M. A., Phang, L-Y., Ariffin, H., Shirai, Y., Ando, Y.

2011

  1. “Melt-Processable Nanocomposites Grafting-From Platelet　Surfaces by Vapor-Assisted Surface Polymerization” ISRN Nanotechnology, 2011, Article ID 589615, 6 pages(Web Journal) Andou, Y., Nishida, H.

2010

  1. “Biomass-Based Composites from Poly(lactic acid) and Wood Flour by Vapor-Phase Assisted Surface Polymerization” ACS Appl. Mater. Interfaces, 2010, 3, 385?391. Kim, D-H., Andou, Y., Shirai, Y., Nishida, H.
  2. “Poly(tetramethyl glycolide) from Renewable Carbon, a Racemization-Free and Controlled Depolymerizable Polyester” Macromolecules, 2010, 44(1), 12?13. Nishida, H., Andou, Y., Watanabe, K., Arazoe, Y., Ide, S., Shirai, Y.
  3. “Racemization-free Monomer: α-Hydroxyisobutyric Acid from Bio-based Lactic Acid” Chemistry Letters, 2010,39 (7), 698?699. Watanabe, K., Andou, Y., Shirai, Y., Nishida, H.

2009

  1. “Superior Hydrophobic Cellulose Fiber Surfaces modified with 2,2,3,3,3-pentafluoropropylmethacrylate (FMA) by Vapor-Phase Assisted Photo-Polymerization” Polymer Journal, 2009 ,42, 519-524 Andou, Y., Jeong, J-M., Kaneko, M., Nishida, H., Endo, T.
  2. “Simple Procedure for Polystyrene-Based Nanocomposite Preparation by Vapor-Phase-Assisted Surface Polymerization” Macromolecules 2009, 42 (20), 7930?7935 Andou, Y.,Jeong, J-M., Nishida, H., Endo, T.
  3. “Design of Nanocomposites by Vapor-Phase Assisted Surface Polymerization.” Macromolecules, 2009, 42 (3), 768?772 Andou, Y., Jeong, J-M., Hiki, S., Nishida, H., Endo, T.

2007

  1. “Designed surface modification by photo-induced vapor phase assisted surface polymerization of vinyl monomers” Journal of Photopolymer Science and Technology, 2007, 20 (4), 523-528
  2. “Gas-Phase Assisted Surface Polymerization of Methyl Methacrylate with Fe(0)/TsCl Initiator System” Journal of Applied Polymer Science, 2007, 103 (3), 1879-1886 Andou, Y., Yasutake, M., Jeong, J-M., Kaneko, M., Nishida, H., Endo, T.

2006

  1. “Designed surface construction by photo-induced vapor-phase assisted surface polymerization of vinyl monomers using immobilized free radical initiators” Chemical Communications, 2006, (48), 5018-5020 Andou, Y., Nishida, H., Endo, T.
  2. “Gas-Phase Assisted Surface Polymerization of Vinyl Monomers with Fe-based Initiating Systems” Macromolecular Chemistry and Physics, 2006, 206 (17), 1778-1783 Andou.Y., Yasutake, M., Jeong, J-M., Nishida, H., Endo, T.

2005

  1. “Gas-phase assisted surface polymerization behavior of beta-propiolactone on inorganic and organic substrates and consequent composite production.” Macromolecular Materials and Engineering, 2005, 290(8), 848-856. Nishida, H., Yamashita. M., Andou.Y., Jeong, J-M., Endo, T.
  2. “Synthesis and spectroscopic analysis of tetraphenyl- porphyrinatoantimony(V) complexes linked to boron-dipyrrin chromophore on axial ligands.” Journal of Photochemistry and Photobiology, A: Chemistry, 2005, 170(3), 287-297. Shiragami, T., Tanaka, K., Andou, Y., Tsunami, S., Matsumoto, J., Luo, H., Araki, Y., Ito, O., Inoue, H., Yasuda, M.

2004

  1. “Physically controlled, free-radical polymerization of vaporized fluoromonomer on solid surfaces.” Journal of Polymer Science, Part A: Polymer Chemistry, 2004, 42(11), 2621-2630. Yasutake, M., Andou, Y., Hiki, S., Nishida, H., T. Endo
  2. “Controlled radical polymerization of vaporized vinyl monomers on solid surfaces under UV irradiation.” Macromolecular Chemistry and Physics, 2004, 205(4), 492-499. Yasutake, M., Andou, Y., Hiki, S., Nishida, H., Endo, T.

2003

  1. “Physically Controlled Radical Polymerization of Vaporized Vinyl Monomers on Surfaces. Synthesis of Block Copolymers of Methyl Methacrylate and Styrene with a Conventional Free Radical Initiator.” Macromolecules, 2003, 36(16), 5974-5981. Yasutake, M., Hiki, S., Andou, Y., Nishida, H., Endo, T.

2002

  1. “Effects of an axial ligand on the reduction potential, proton dissociation, and fluorescence quantum yield of hydroxo(porphyrinato)antimony(V) complexes.” Bulletin of the Chemical Society of Japan. 2002, 75(7), 1577-1582. Shiragami, T., Andou, Y., Hamasuna, Y., Yamaguchi, F., Shima, K., Yasuda, M.
  2. “Synthesis and fluorescence study of a (2-naphthoxy)polyoxalkoxyantimony(V) tetraphenylporphyrin complex.” Journal of Photochemistry and Photobiology, A: Chemistry, 2002, 147(3), 191-197. Andou, Y., Shiragami, T., Shima, K., Yasuda, M.
  3. “O-Alkylation of dihydroxo(tetraarylporphyrinato)- phosphorus(V) and antimony(V) complexes with alkyl halides.” Bulletin of the Chemical Society of Japan, 2002, 75(8), 1757-1760. Andou, Y., Ishikawa, K., Shima, K., Shiragami, T., Yasuda, M., Inoue, H.

2001

  1. “Fluorescence responses on ion recognition with 2-(4-dialkylaminophenyl)ethoxyantimony(V) tetraphenylporphyrin.” Chemistry Letters, 2001, (11), 1198-1199. Andou, Y., Shima, K., Shiragami, T., Yasuda, M.

1999

  1. “Solvent parameter based on the exciplex emission of (2-naphthoxy)polyoxalkyl p-cyanobenzoates.” Journal of Photochemistry and Photobiology, A: Chemistry, 1999, 121(3), 149-155. Yasuda, M., Kawahito, Y., Sasano, K., Andou, Y., Shiragami, T., Shima, K.

1998

  1. “Controlled polymerization of an AB2 monomer using a chloromethylarene as comonomer. Branched polymers from activated methylene compounds.” Macromolecular Rapid Communications, 1998, 19(1), 41-46. Jin, R-H, Motokucho, S., Andou, Y., Nishikubo, T.

1996

  1. “Novel One-Step Synthesis of Random Hyperbranched Polymers from Activated Methylene AB2 Monomer.” Macromolecules, 1996, 29(24), 8010-8013 Jin, R-H., Andou, Y.

著書

2017

  1. 九州工業大学/安藤 義人・Kubra Eksiler/(株)明菱/西口秀和・吉廣 稔 “金属加工廃棄物を利用した機能性複合材料の特徴” プラスチックス 2017年7月号

2016

  1. 安藤義人、 白井義人 “パームオイル製造に伴う環境負荷の低減とパームバイオマス、工場余剰エネルギーの有効利用によるグリーン産業の創出のための革新的科学技術の開発” 地方創生に関わる取り組み‐日本各地の活動とネットワークの必要性‐、公益社団法人　日本生物工学会　西日本支部＆生物資源を活用した地域創生研究部会, 三恵社pp. 95-97 (2016.11.5).

2015

  1. 安藤義人、西田治男乳酸から展開するケミカルリサイクル可能な資源循環型ポリマーの開発 バイオプラジャーナル 15(1), 10-13(平成27年)

2012

  1. 西田治男、 安藤義人 エコフィッティングな溶剤フリー重合プロセス：機能を持ったミクロ表面を創る西日本新聞社、九工大世界トップ技術Vol.3., pp.142-153, 2012.

2011

  1. 西田治男、 安藤義人、白井義人 九州工業大学エコタウン実証研究センターの取り組み : バイオマス由来プラスチックによる資源循環システムの構築を目指して プラスチックス、3月号62巻第2号、pp.24-28(平成23年)

2010

  1. Y. Andou, H. Nishida, Y. Shirai. Development of Polytetramethylglycolide from Lactic Acid for Sustainable Biomass-based Polyester 高分子　Hot Topics, 59巻　11月号　(平成22年)

海外

2021

  1. KUBRA EKSILER, YOSHITO ANDOU* AND TESSEI KAWANO. Chapter 11: “Fabrication of Biodegradable Cellulose Composite Through a Greener Reaction Process” In book: Cellulose Nanoparticles: Volume 2: Synthesis and Manufacturing (RSC publishing).

2018

  1. Hamra A.A. Bashid, Hong N. Lim, Syed M. Hafiz,Yoshito Andou, Mohammednoor Altarawneh, Zhong T. Jiang, Nay M. Huang. Chapter 16 : “Modification of Carbon-Based Electroactive Materials for Supercapacitor”In book: Carbon-Based Polymer Nanocomposites for Environmental and Energy Applications. January 2018 DOI: 10.1016/B978-0-12-813574-7.00016-2 (2018)

2017

  1. Yoshito Ando, Haruo Nishida Chapter 14.: “The surface functionalization through vapor-phase assisted surface polymerization(VASP) for natural filler based on agricultural waste” in “Handbook of Composite from Renewable Materials Vol.4”, Edited by Vijay Kumar Thakur Wiley-VCH Verlag GmbH&Co. KgaA.(2017)

2011

  1. Haruo Nishida, Yoshito Ando, Takeshi Endo Chapter 4.: Gas-phase-Assisted Surface Polymerization and Thereby Preparation of Polymer Nanocomposites” in “In-situ Synthesis of Polymer Nanocomposite”, Edited by Vikas Mittal. Wiley-VCH Verlag GmbH&Co. KgaA., pp. 89-104 (2011)

PATENT

  1. (単願) 特開2021-25055 ・安藤義人、エクシラー・クブラ、“表面改質ナノセルロース及びその製造方法”・国立大学法人九州工業大学・令和元年 8月 7日
  2. (単願) 特開2020-128475 ・安藤義人、エクシラー・クブラ・“樹脂混合用ハイブリッドフィラー及びその製造方法”・ 国立大学法人九州工業大学・平成31年2月 8日
  3. (共願)特願2020-067026号 ・安藤義人、サファルムスタファ、“ウレタン樹脂組成物及びその製造方法”・国立大学法人九州工業大学、三和綜合土木・令和2年4月 2日
  4. “環状アセタールラクトンの製造方法”出願人：国立大学法人九州工業大学　発明者：チャン　チ　ホン、安藤　義人、西田　治男　特願2017-49808　日付非公開
  5. “成形材料、成形装置及び成形体の製造方法”　出願人：株式会社明菱　発明者：安藤義人、エクシラクブラ、西口秀和.特願2016-098800, May 17, 2016.
  6. “成形材料、導電性材、電磁波遮蔽材及び成形品の製造方法”　出願人：株式会社明菱　発明者：安藤義人、エクシラクブラ、西口秀和.　特願2016-224707, Nov 18, 2016
  7. “黒錆微粒子の製造方法、製造装置及び黒錆微粒子”出願人：（株）明菱, 国立大学法人九州工業大学　発明者：安藤義人、エクシラクブラ、西口秀和、水井雅彦. 特願2015-0727, May 31, 2015.
  8. “Biomass powder derived from oil palm and production therefor, and biomass composite molded body and production therefore.” H. Nishida Y. Andou, Y. Shirai N. Ida, S. Karuppuchamy, H. Ariffin, M.A. Hassan,PCT/JP2012/007427 (日本、インドネシア、マレーシアへ出願中)
  9. “表面被覆された木質系複合材料”西田治男、安藤義人、金同希、岩本正秋、白井義人特開２０１１－１８３６８０
  10. “Process for manufacturing organoclay-polymer nanocomposites by gas phase polymerization.”Y. Andou, J-M, Jeong, S. Hiki, M. Kaneko,H. Nishida, T. EndoPCT/EP2006/002419, EP20050005823,EP20060707586,
  11. “Gas phase radical polymerization for fabric treatment.” Y. Andou, J-M, Jeong, S. Hiki, M. Kaneko,H. Nishida, T. Endo, A. Shirai, A. Schmidt, E. HattemerPCT/EP2006/012559.
  12. “Zero valent metal initiated gas-phase deposition polymerization (gdp).” H.Nishida, Y. Andou, M.Yasutake, T. Endo,PCT/EP2004/003694, EP20030014884, US 11/318,933